Hey, I'll have a look and get back to you. Probably both scripts assigning to same command slots.
EDIT
Well, I've fixed the problem by changing the command slots I used. Still, DDRS should probably be in the sticky.
[Script] Autotransfer Alternative and Station Profit Monitoring v1.23 7-3-06
Moderators: Moderators for English X Forum, Scripting / Modding Moderators
-
fortysix2nz
- Posts: 84
- Joined: Wed, 3. Dec 03, 09:48
its not actually, but I wouldn't be surprised if its wrong. I did it reasonably late at night. I also didn't bother to actually rename the ZIP. I have now. If you still have a conflict I'll fix it tonight. And thoroughly test it.
EDIT
Ok, I changed the links to say what they're downloading. They should download v1.22 but I'm not 100% sure this'll fix it. Please tell me if it does/doesn't. I haven't had a chance to test it. If someone knows about these things, what I did as simply change the references in the t file to command slots 44,45,46 instead of 41,42,43. Is this the best way? or do I need to edit the setup file to refer to the correct commands?
EDIT
Ok, I changed the links to say what they're downloading. They should download v1.22 but I'm not 100% sure this'll fix it. Please tell me if it does/doesn't. I haven't had a chance to test it. If someone knows about these things, what I did as simply change the references in the t file to command slots 44,45,46 instead of 41,42,43. Is this the best way? or do I need to edit the setup file to refer to the correct commands?
fortysix2nz, I just tried using ur script, created the monitoring files, but after 45mins of gameplay, the log files only show "0,0" even tho the timings are 5mins. I created about 10 logfiles (00001 to 00010) and all of them show only the headings, station name and "0,0".
Is the correct order of activation as such:
1) Set upper limit and lower limit.
2) Set logfile and timing.
3) Do request update.
I notice after doing steps 1 and 2, the station command slot actually showed "Unknown command!" instead of None. After doing 3), it goes to None after about 2 seconds.
EDIT: Looking at the scripts, the Autotransfer script, I noticed the write to log code is commented out?
Is the correct order of activation as such:
1) Set upper limit and lower limit.
2) Set logfile and timing.
3) Do request update.
I notice after doing steps 1 and 2, the station command slot actually showed "Unknown command!" instead of None. After doing 3), it goes to None after about 2 seconds.
EDIT: Looking at the scripts, the Autotransfer script, I noticed the write to log code is commented out?
Ok I think the problem (or is it just me) was that after 2.0.2 the command ware points elsewhere, so instead of mapping to the command it shows ReadText in the Command argument and thus "Unknown Command!" in the command slot.
Resetting the value, now the station command slot shows the right values. No wonder it "didn't work", cuz each Autotransfer and Monitor Station command must occupy 1 slot each.
Resetting the value, now the station command slot shows the right values. No wonder it "didn't work", cuz each Autotransfer and Monitor Station command must occupy 1 slot each.
So does 1.23 work with 2.0.02?Ok I think the problem (or is it just me) was that after 2.0.2 the command ware points elsewhere, so instead of mapping to the command it shows ReadText in the Command argument and thus "Unknown Command!" in the command slot.
Just starting to get bored with the game, and so looking for scripts, but i have no idea what to do if one goes wrong... hence the caution.
I <3 UTs 
Alienmoe "But come on. You screwed up if you're dead."
Parazac "in my case, they should change the words to:
'uh oh, you just tried something silly didnt you!'"
-Talking about "The End"
Alienmoe "But come on. You screwed up if you're dead."
Parazac "in my case, they should change the words to:
'uh oh, you just tried something silly didnt you!'"
-Talking about "The End"
U'll need (I think!) to meddle with it in the SE. That's what I did. It prolly does work already, I just didn't like "Unknown Command!" showing in my station slots. Just remember to use separate slots for each Autotransfer and Monitoring command. Even the Request Update command, u have to use a separate slot.Alienmoe wrote:So does 1.23 work with 2.0.02?Ok I think the problem (or is it just me) was that after 2.0.2 the command ware points elsewhere, so instead of mapping to the command it shows ReadText in the Command argument and thus "Unknown Command!" in the command slot.
Just starting to get bored with the game, and so looking for scripts, but i have no idea what to do if one goes wrong... hence the caution.
Just update the Command Name argument to properly reflect the command. Or I can upload the updated script.
Hi Arcana75,
It sounds like you've found a solution to the issue I'm also having with 'Unknown Command!' coming up in the station command console. I've read your instructions about how to fix this, but I'm not exactly sure what is exactly required, are you able to upload the fix or more detailed instructions?
I would be very appreciative of your help!
Cheers,
Sam.
It sounds like you've found a solution to the issue I'm also having with 'Unknown Command!' coming up in the station command console. I've read your instructions about how to fix this, but I'm not exactly sure what is exactly required, are you able to upload the fix or more detailed instructions?
I would be very appreciative of your help!
Cheers,
Sam.
-
StratonAce
- Posts: 72
- Joined: Mon, 22. Jan 07, 00:13
